coelhos Bunny(LuvlyGurumi)

SAVE OFFLINE

♥♥♥

bunny CroCHet Pattern

♥♥♥

By: LuvlyGurumi www.luvlygurumi.etsy.com

This pattern is protected under Creative Commons “Attribution Noncommercial No Derivatives Works 3.0 Unported” License. For additional information, please visit http://creativecommons.org/about/licenses/. This pattern and dolls created from this pattern may not be used for retail or commercial purposes.

Materials: ♥ ♥ ♥ ♥ ♥

yarn colors of your choice crochet hook of the appropriate size for the yarn chosen one pair of safety eyes stuffing (fiberfill, polyfill, etc.) tapestry needle

Recommended Materials: ♥ Vanna’s Choice yarn ♥ 4.25 mm crochet hook ♥ 10.5 mm safety eyes

Finished Size: Bunny stands approximately 9” tall based on “recommended materials”. Sizes may vary depending on the yarn and size of crochet hook used.

Abbreviations: R = round st = stitch ch = chain stitch sc = single crochet BP = back post stitch inc = increase (single crochet twice in the same stitch) dec = decrease (single crochet two stitches together) * = repeat instructions between * and *

Important Note: Each piece begins with a “ring”. Use any type of ring you are comfortable with (i.e. adjustable loop, chain 2 and single crochet in second chain, etc.). Work in one continuous spiral and mark the last stitch of each round to keep track of where you are.

♥ Bunny Head R1 Make a ring with 6 sc R2 inc 6 (12 st) R3 * sc 1, inc 1 * - repeat 6 times (18 st) R4 * sc 2, inc 1 * - repeat 6 times (24 st) R5 * sc 3, inc 1 * - repeat 6 times (30 st) R6 * sc 4, inc 1 * - repeat 6 times (36 st) R7 * sc 5, inc 1 * - repeat 6 times (42 st) R8 sc 42 R9 * sc 6, inc 1 * - repeat 6 times (48 st) R10 sc 48 R11 * sc 7, inc 1 * - repeat 6 times (54 st) R12 sc 54 R13 sc 54 R14 sc 54 R15 sc 54 R16 sc 54 R17 sc 54 R18 * sc 7, dec 1 * - repeat 6 times (48 st) R19 * sc 6, dec 1 * - repeat 6 times (42 st) R20 * sc 5, dec 1 * - repeat 6 times (36 st) R21 * sc 4, dec 1 * - repeat 6 times (30 st) R22 * sc 3, dec 1 * - repeat 6 times (24 st) R23 * sc 2, dec 1 * - repeat 6 times (18 st) Fasten off and weave in ends

♥ Bunny Body R1 Make a ring with 6 sc R2 inc 6 (12 st) R3 * sc 1, inc 1 * - repeat 6 times (18 st) R4 * sc 2, inc 1 * - repeat 6 times (24 st) R5 * sc 3, inc 1 * - repeat 6 times (30 st) R6 * sc 4, inc 1 * - repeat 6 times (36 st) R7 * sc 5, inc 1 * - repeat 6 times (42 st) R8 sc 42 R9 sc 42 change to shirt color R10 sc 42 R11 BP sc 42 (or continue using single crochet if you prefer) R12 * sc 5, dec 1 * - repeat 6 times (36 st) R13 sc 36 R14 * sc 4, dec 1 * - repeat 6 times (30 st) R15 sc 30 R16 * sc 3, dec 1 * - repeat 6 times (24 st) R17 sc 24 Fasten off and leave long tail for sewing

♥ Bunny Ears (make 2) R1 Make a ring with 5 sc R2 inc 5 (10 st) R3 sc 10 R4 * sc 1, inc 1 * - repeat 5 times (15 st) R5 sc 15 R6 sc 15 R7 sc 15 R8 sc 15 R9 * sc 3, dec 1 * - repeat 3 times (12 st) R10 sc 12 R11 sc 12 R12 * sc 2, dec 1 * - repeat 3 times (9 st) Fasten off and leave tail for sewing

♥ Bunny Arms (make 2) R1 Make a ring with 6 sc R2 * sc 1, inc 1 * - repeat 3 times (9 st) R3 sc 9 change to shirt color R4 sc 9 R5 sc 9 R6 sc 9 R7 sc 9 R8 sc 9 Fasten off and leave tail for sewing

♥ Bunny Legs (make 2) R1 Make a ring with 6 sc R2 inc 6 (12 st) R3 sc 12 R4 sc 12 R5 * sc 2, dec 1 * - repeat 3 times (9 st) R6 sc 9 R7 sc 9 Fasten off and leave tail for sewing

♥ Bunny Hood Note that the slits for the bunny ears to pop through are made in R16. R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16

R17 R18 R19 R20 R21 R22

Make a ring with 6 sc inc 6 (12 st) * sc 1, inc 1 * - repeat 6 times (18 st) * sc 2, inc 1 * - repeat 6 times (24 st) * sc 3, inc 1 * - repeat 6 times (30 st) * sc 4, inc 1 * - repeat 6 times (36 st) * sc 5, inc 1 * - repeat 6 times (42 st) * sc 6, inc 1 * - repeat 6 times (48 st) sc 48 sc 48 sc 48 sc 48 sc 42, ch 1, turn your work sc 42, ch 1, turn your work sc 42, ch 1, turn your work sc 14, skip 5 stitches and ch 5, sc 4 beginning after the 5 stitches that were just skipped, skip 5 stitches and ch 5, sc 14, ch 1, turn your work sc 42, ch 1, turn your work sc 42, ch 1, turn your work sc 42, ch 1, turn your work sc 42, ch 1, turn your work sc 42, ch 1, turn your work sc 42

Next, make the straps for the hood. From the last stitch, chain 25 and fasten off. Weave in the same colored yarn at the other end of the hood. Once again, chain 25 and fasten off.

♥ Suggested Bunny Assembly Order 1) Attach the safety eyes through the eye patches and through the head (between R13 and R14) 2) Use a yarn color of your choice to make the “x” nose 3) Stuff the head and the body 4) Sew the body to the head 5) Sew the ears onto the head. Make sure the ears are centered so that the hood will fit properly (see photo on following page) 6) Sew the arms onto the body 7) Sew the legs onto the body 8) Accessorize your new bunny with its hood!

Note: the order of assembly is completely up to you.